To the knowledge base

Using a media receiver for IPTV in the FRITZ! home network

You can easily connect the media receiver (set-top box) from your internet service provider with your television and the FRITZ!Box home network. The media tuner can then access the internet service provider's IPTV service and you can play TV channels and video-on-demand movies from your internet service provider on your television.

Requirements / Restrictions

  • The FRITZ!Box must be connected to an internet connection with an IPTV package, for example from Deutsche Telekom (MagentaTV), Vodafone (Vodafone TV), A1, KPN or Proximus.
  • It is only possible to play back HD channels or several channels at the same time if the DSL connection is fast enough. SD channels require data rates of around 4-6 Mbit/s, HD channels require around 10 Mbit/s (for each TV channel played at the same time).

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Configuring the FRITZ!Box

In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:

Important:If the FRITZ!Box uses the internet connection of another router, then the DHCP server of the FRITZ!Box is disabled. In this case, the upstream router must assign the IP settings to the devices.

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. Click "Additional Settings" in the section "WAN setting" or "LAN Settings" to display all of the settings.
  5. Click the "IPv4 Settings" button.
  6. Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.

    Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.

  7. Click "Apply" to save the settings.

2 Setting up the media receiver

Make sure that the media receiver obtains its IP settings from the FRITZ!Box:

  1. Configure the media receiver to automatically obtain IP settings via DHCP (this is the default setting for most receivers). Refer to the manufacturer for information on how to set it up, for example consult the manual.

3 Connecting the media receiver to the home network

  1. Use a network cable to connect the media receiver to a LAN port on the FRITZ!Box.

    Note:If you cannot connect the receiver and FRITZ!Box by cable, you can also connect them via Wi-Fi or your home's electrical wiring, for example with a FRITZ!Repeater or FRITZ!Powerline.

Now you can use your internet service provider's IPTV and video on demand package with the media receiver.