To the knowledge base

Starting network devices over the internet (Wake on LAN)

"Wake on LAN" allows you to start computers, NAS systems, and other network devices in the FRITZ!Box home network over the internet.

This way you can always access one of your computers using remote maintenance software without having to leave it on all the time, for example.

Requirements / Restrictions

  • The device must be connected to a LAN port on the FRITZ!Box or a LAN port on a Mesh Repeater (for example FRITZ!Repeater).
  • The device must support the ACPI (Advanced Configuration and Power Management Interface) standard.

Note:All instructions on configuration and settings given in this guide refer to the FRITZ!Box 6820 LTE v2 and v3 with the latest FRITZ!OS, the FRITZ!Box 6820 LTE v1 may vary.

1 Configuring a network device

  1. Enable "Wake on LAN" and a suitable hibernation mode ("S3" to "S5") in the network device, for example in the computer's BIOS menu. Refer to the manufacturer of the device for information on how to set it up, for example consult the manual.

2 Configuring the FRITZ!Box

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" in the "Home Network" menu.
  3. Click on the "Network Connections" tab.
  4. Click the (Edit) button next to the device you want to configure.
  5. Enable the option "Start this computer automatically as soon as it is accessed from the internet" in the section "LAN Connection".

    Note:You can click the "Start Computer" button to start the device directly from standby mode and easily test whether it supports "Wake on LAN".

  6. Click "Apply" to save the settings.

Now the device is started automatically as soon the device is accessed from the internet over a shared port or a VPN client connection (for example with a smartphone or tablet). The device is started after about 10 seconds and can be accessed.