Baza wiedzy
AVM Content
Using a Blu-ray player in the FRITZ! home network
If your Blu-ray player is equipped with a network port or Wi-Fi, you can easily connect it to the FRITZ!Box home network. The Blu-ray player can then access the internet and be used as a playback device for multimedia content such as photos, videos, and music.
Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.
1 Configuring the FRITZ!Box
In the factory settings, the FRITZ!Box automatically assigns the correct IP settings to all devices via DHCP. If you disabled the FRITZ!Box's DHCP server, re-enable it:
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Network" in the "Home Network" menu.
- Click on the "Network Settings" tab.
- Click "Additional Settings" in the section "LAN Settings" to display all of the settings.
- Click the "IPv4 Settings" button.
- Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.
Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.
- Click "Apply" to save the settings.
2 Configuring the Blu-ray player
Make sure that the Blu-ray player obtains its IP settings from the FRITZ!Box:
- Configure the Blu-ray player to automatically obtain IP settings via DHCP (this is the default setting for most Blu-ray players). Refer to the manufacturer for information on how to set it up, for example consult the manual.
3 Connecting the Blu-ray player to the home network
- Use either Wi-Fi or a network cable to connect the Blu-ray player to the home network.
Now the Blu-ray player is connected to the internet through the FRITZ!Box and can play multimedia content from the FRITZ!Box media server and other media servers in the home network (for example Kodi, Plex).
Note:Refer to the manufacturer for further information on how to set up the Blue-ray player.