FRITZ!Box 3390 Serwis - Baza wiedzy

FRITZ!Box 3390 Serwis
Not your product?
This document is also available for the following products:

Connecting FRITZ!WLAN Repeater with the home network via wireless LAN

FRITZ!WLAN Repeater increases the wireless range (WiFi) of your FRITZ!Box easily and efficiently. To do so, use WPS (WiFi Protected Setup) to set up the connection between the repeater and FRITZ!Box.

Fig.: Connection scenario for wireless bridge mode

1 Loading the FRITZ!WLAN Repeater factory settings

Before you can configure the following settings, you must return the FRITZ!WLAN Repeater to its factory settings:

2 Connecting FRITZ!WLAN Repeater with the home network

  1. For setup, plug the FRITZ!WLAN Repeater into an outlet near the FRITZ!Box.
  2. Wait until the "Power" and "WLAN" LEDs on the repeater remain lit.
  3. Briefly push the "WPS" button on the repeater (for about 1 second). The "WLAN" LED starts to flash after you release the button.
  4. Within 2 minutes: Briefly push and hold the "WPS" button on the FRITZ!Box (for about 1 second) until the "WLAN" LED flashes.
  5. One or more LEDs indicating signal strength remain lit on the repeater once configuration is completed.

3 Finding the ideal location for the FRITZ!WLAN Repeater

To optimally increase the range, the repeater requires a fast and stable wireless connection to the home network: