FRITZ!Box 3490 Serwis - Baza wiedzy

FRITZ!Box 3490 Serwis

FRITZ!Box USB remote connection reports "No FRITZ!Box found!"

The FRITZ!Box USB remote connection software displays the error message "No FRITZ!Box found!". This means that you cannot connect USB devices to the computer using the FRITZ!Box USB remote connection software.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

1 Setting up the USB remote connection in FRITZ!Box

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "USB Devices" in the "Home Network" menu.
  3. Click on the "USB Remote Connection" tab.
  4. Enable the USB remote connection.
  5. Select the type of devices for which the USB remote connection should be enabled, for example "USB storage media".
  6. Click "Apply" to save the settings.

2 Connecting the computer without using guest access

You cannot use the FRITZ!Box USB remote connection with LAN guest access or wireless guest access. Therefore, make sure that the computer is not connected with the FRITZ!Box via guest access:

3 Activating the "SSDP Discovery" service in Windows

Windows 10

  1. Enter sys in the search box in the Windows taskbar and then select "Control Panel".
  2. Select "Category" from the drop-down list "View by:" on the top right ().
  3. Click "System and Security" and then "Administrative Tools".
  4. Double-click the entry "Services".
  5. Double-click on the entry "SSDP Discovery" displayed in the "Name" column.
  6. Select "Automatic" as the startup type.
  7. Click "OK" to save the settings.
  8. Restart your computer.

Windows 8

  1. Press the keyboard shortcut Windows key + X and select "Control Panel" from the context menu.
  2. Select "Category" from the drop-down list "View by:" on the top right ().
  3. Click "System and Security" and then "Administrative Tools".
  4. Double-click the entry "Services".
  5. Double-click on the entry "SSDP Discovery" displayed in the "Name" column.
  6. Select "Automatic" as the startup type.
  7. Click "OK" to save the settings.
  8. Restart your computer.

Windows 7

  1. In Windows, click "Start" and then "Control Panel".
  2. Select "Category" from the drop-down list "View by:" on the top right ().
  3. Click "System and Security", and then "Administrative Tools" and "Services".
  4. Double-click on the entry "SSDP Discovery" displayed in the "Name" column.
  5. Select "Automatic" as the startup type.
  6. Click "OK" to save the settings.
  7. Restart your computer.

4 Configuring the computer's firewall

A firewall on the computer with the FRITZ!Box USB remote connection can interfere with the communication between the software and the FRITZ!Box:

  • Either: Configure an exception for the FRITZ!Box USB remote connection software in the firewall.
    • Or: Configure the firewall so that it allows incoming and outgoing TCP and UDP connections from port 2066 on the FRITZ!Box to any destination ports on the computer.

      Note:Refer to the manufacturer of the firewall for information on how to set it up, for example consult the manual.

The FRITZ!Box and the computer are now completely configured to use the FRITZ!Box USB remote connection software. We are not aware of any further measures for this issue. Further causes could be disturbances or an error of the operating system or firewall on the computer.