FRITZ!Box 4020 Serwis - Baza wiedzy

FRITZ!Box 4020 Serwis
Not your product?

Error message "...limited or no connectivity"

An exclamation point is displayed next to the icon for the LAN or wireless (WiFi) connection to the FRITZ!Box in the Windows taskbar (SysTray) on a Windows computer and the notification "... limited or no connectivity" is displayed. You cannot open the FRITZ!Box user interface (fritz.box) or access the Internet over the FRITZ!Box with this computer.

Simply proceed as described below. After each measure, check whether the issue persists.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

1 Activating the "DHCP Client" service in Windows

Windows 10 / 8

  1. Press the keyboard shortcut "Windows key" + "X" and select "Control Panel" from the context menu.
  2. Select "Category" from the drop-down list "View by:" (top right) in the "Control Panel" menu.
  3. Click "System and Security" and then "Administrative Tools".
  4. Double-click on the entry "Services".
  5. Double-click on the entry "DHCP Client" displayed in the "Name" column.
  6. Select "Automatic" as the startup type.
  7. Click "Start" (if available) and then "OK".
  8. Restart your computer.

Windows 7

  1. In Windows, click "Start" and then "Control Panel".
  2. Select "Category" from the drop-down list "View by:" (top right) in the "Control Panel" menu.
  3. Click "System and Security", and then "Administrative Tools" and "Services".
  4. Double-click on the entry "DHCP Client" displayed in the "Name" column.
  5. Select "Automatic" as the startup type.
  6. Click "Start" and then "Apply".
  7. Restart your computer.

2 Configuring the FRITZ!Box

Preparations

  • Use a network cable to connect the computer to the "LAN 1", "LAN 2" or "LAN 3" port on the FRITZ!Box.
    • Only if the FRITZ!Box is connected to the computer via wireless LAN:
      • Clear the wireless connection between the computer and the FRITZ!Box.

Enabling the DHCP server

  1. Call up the address http://169.254.1.1 in a web browser.
  2. Click "Home Network" and then "Home Network Overview".
  3. Click on the "Network Settings" tab.
  4. Click the "IPv4 Addresses" button.
  5. Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.

    Note:The FRITZ!Box has the IP address 192.168.178.1 (subnet mask 255.255.255.0) and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.

  6. Click "OK" to save the settings.

3 Configuring the computer's firewall

A firewall is preventing the computer from obtaining its IP settings from the FRITZ!Box's DHCP server:

  • Configure the firewall on the computer so that it allows connections from the computer to the FRITZ!Box. Refer to the manufacturer of the firewall for information on how to set it up, for example consult the manual.

4 Checking the LAN connection to the FRITZ!Box

If you are experiencing connectivity problems with LAN connections, this may be caused by errors in the cabling, energy-saving functions, or intermediary devices such as hubs/switches, powerline adapters, or LAN/wireless LAN converters. Therefore, check the computer's LAN connection: