FRITZ!Box 6490 Serwis - Baza wiedzy

FRITZ!Box 6490 Serwis

Cannot register a FRITZ!DECT radiator control

Registration of the FRITZ!DECT radiator control, for example FRITZ!DECT 300, to a FRITZ!Box fails. After inserting the batteries into the device, "PREP" or "Gerät wird vorbereitet" is first shown in the display, and then "INST" or "Gerät wird angepasst". However, the DECT connection is not established when you push the "DECT" button on the FRITZ!Box. The symbol for the radio connection is not shown continuously in the display of the radiator control. The error message "Could not complete registration of the FRITZ! actuator" is displayed in the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Maximum number has been reached

You can register a maximum of twelve radiator controls with the FRITZ!Box. If you already registered twelve devices, you cannot register any more.

Note:Registering a radiator control does not reduce the number of telephones, DECT repeaters, or the number of outlet switches, for example FRITZ!DECT 200, that can be registered.

2 Disabling the keylock

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the "Buttons locked" checkbox.
  5. Click "Apply" to save the settings.

3 Disabling "Reduce DECT field strength"

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Disable the option "Reduce DECT field strength" in the section "Radio Field Strength".
  4. Click "Apply" to save the settings.

4 Disabling "DECT Eco"

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Disable the option "DECT Eco" in the section "Radio Field Strength".
  4. Click "Apply" to save the settings.

5 Enabling encryption

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Enable the option "Permit only secure DECT connections (recommended)" in the section "Security".
  4. Click "Apply" to save the settings.
  5. If the option was disabled, you must then restart the FRITZ!Box once using the user interface ("System > Backup > Restart").

6 Setting a PIN

For automatic registration to work, you must set the PIN to "0000" in the FRITZ!Box user interface:

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Enter "0000" as the PIN in the section "Registration".
  4. Click "Apply" to save the settings.

7 Re-registering the radiator control

Loading the factory settings of the radiator control

  1. Push the "Menu" button on the radiator control.
  2. Select the menu item "RES" or "Zurücksetzen" and push "OK".
  3. Push "OK" again.

Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click on the "Restart" button.

Establishing a DECT connection

  1. Remove the batteries from the battery compartment on the radiator control for at least 30 seconds.
  2. If the radiator control is not mounted on the radiator:
    1. Reinsert the batteries. "PREP" or "Gerät wird vorbereitet" is first shown on the display, and then "INST" or "Gerät wird angepasst".
    2. Within 90 seconds, push the "DECT" button on the FRITZ!Box and hold the button down until the "DECT" or "Info" LED on the FRITZ!Box starts to flash.
        • The connection to the FRITZ!Box is established.
    • If the radiator control is mounted on the radiator:
    1. Reinsert the batteries. "PREP" or "Gerät wird vorbereitet" is first shown on the display, and then "INST" or "Gerät wird angepasst".
    2. Push the "OK" button until "ADAP" or "Gerät wurde erfolgreich installiert" is shown in the display. The valve adjustment is completed as soon as the preset temperature appears on the display.
    3. Push the "DECT" button on the FRITZ!Box and hold the button down until the "DECT" or "Info" LED on the FRITZ!Box starts to flash.
    4. Push the "Menu" button within 90 seconds.
    5. Use the setting wheel on the radiator control to select the menu item "FUNK" or "Anmeldung" and then push the "OK" button.
      • The message "Anmeldung war erfolgreich" is shown on FRITZ!DECT 301.
    6. Wait until "SUCH" flashes in the display of FRITZ!DECT 301 and then push the "OK" button.
      • The connection to the FRITZ!Box is established.

The radio connection is established as soon as the symbol for the existing radio connection appears in the display of the radiator control.