FRITZ!Box 6820 LTE Serwis - Baza wiedzy

FRITZ!Box 6820 LTE Serwis

Cannot configure port sharing rules

No further port sharing rules can be configured for a device in the FRITZ!Box. When you click "OK", the port sharing rules are not saved and added to the list of port sharings under "Internet > Permit Access > Port Sharing". The FRITZ!Box does not display an error message.

Cause

  • Error in FRITZ!OS 6.8x

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

1 Setting up a IPv6 connection in the FRITZ!Box

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Click on the "IPv6" tab. If the tab is not displayed, enable the Advanced View first.
  4. Enable the option "IPv6 support enabled".
  5. If the option "Use native IPv4 connection (recommended)" is enabled in the "IPv6 Connectivity" section:
    1. Enable the option "Always use a tunnel protocol for the IPv6 connection".
    2. Enable the option "6to4" in the "Connection Settings" section.
  6. Click "Apply" to save the settings.

2 Deleting port sharing

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Permit Access" in the "Internet" menu.
  3. Click on the "Port Sharing" or "Port Forwarding" tab.
  4. Click the (Delete) button next to each device / name and select "OK" when asked whether you would you like to delete the device from the list of shared ports.
  5. Click "Apply" to save the settings.

3 Reconfiguring port sharing