FRITZ!Box 6820 LTE Serwis - Baza wiedzy

FRITZ!Box 6820 LTE Serwis
Not your product?
This document is also available for the following products:

"Power" LED flashes

Your FRITZ!Box establishes a connection to the mobile network as soon as you insert your SIM card and enter the PIN in the FRITZ!Box user interface. This can take up to 2 minutes. During this time, the "Power" LED on the FRITZ!Box flashes and then stays lit as soon as the connection has been established.

This guide shows you how to resolve the following issue:

  • The FRITZ!Box's "Power" LED flashes continuously and you cannot connect to the Internet.

One or several of the following error messages may be displayed in the event log of the FRITZ!Box:

  • "No LTE network was found within range."
  • "Could not establish LTE connection. Reason: EPS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN"

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

Simply proceed as described below. After each measure, check whether the issue persists.

1 Checking which LEDs flash

2 Checking your SIM card

Although it may not appear to be the case, your SIM card may have been inserted incorrectly, it may be damaged, or it may be the incorrect SIM card. Therefore, check the SIM card in the FRITZ!Box:

  1. Press the SIM card briefly in order to remove it from the SIM card slot.
  2. Check the SIM card.
    • If the contacts on the SIM card are damaged or it is not the SIM card you received from your mobile network operator:
      • Contact your mobile network operator.
    • If it is the SIM card you received from your mobile network operator and the contacts on it are not damaged:
    1. Pick up the FRITZ!Box so that you are facing the underside of the device and can read the "SIM Card" label on the SIM card slot.
    2. Insert the SIM card that you received from your mobile network operator into the SIM card slot with the slanted edge of the card on the left and the contacts facing downwards (see fig.).
    3. Push the SIM card gently into the SIM card slot until it clicks into place.

      Fig.: Inserting the SIM card

      • A few millimeters of the SIM card protrude from the SIM card slot.

3 Configuring the FRITZ!Box

Enabling roaming

The following step is only necessary if you are not using the FRITZ!Box in Germany and your mobile network operator is using a different provider's network at your location:

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Enable the option "Permit roaming".

    ATTENTION!If you enable roaming, additional costs may accrue. Your LTE provider can provide you with information on roaming and possible costs.

  4. Click "Apply" to save your settings.

Selecting the type of mobile communication

Depending on your mobile network operator and your contract, if there are several radio cells at your location, you may need to manually select the desired type of mobile communication in the FRITZ!Box:

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Select "LTE only" from the drop-down list "Type of mobile communication" and click "Apply".
  4. If you are now no longer able to connect to the mobile network:
    • Test the setting "UMTS only" and then "GSM only"; use the type of mobile communication with which the FRITZ!Box achieves the highest throughput.

Selecting the LTE frequency band

Depending on your mobile network operator, at individual locations you may need to select the LTE frequency band in the FRITZ!Box manually:

Note:In Germany, the frequency bands 2.6 GHz, 1.8 GHz, and 800 MHz are used. Not all frequency bands are available at all locations, and not all LTE providers support all frequency bands.

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Select "Only 2.6 GHz / band 7" from the drop-down list "LTE frequency band" and click "Apply".
  4. If the FRITZ!Box can establish a mobile connection using the frequency band you selected:
    1. Click "Internet" and then "LTE Information".
    2. Click on the "Mobile Communications" tab.
    3. Check which speed is displayed in the "Throughput" line.
  5. Repeat steps 2 - 4 with the frequency bands "Only 1.8 GHz / band 3" and "Only 800 MHz / band 20", and use the frequency band with which the FRITZ!Box can achieve the highest throughput.

4 Installing the latest FRITZ!OS for the FRITZ!Box

Installing the latest FRITZ!OS makes your FRITZ!Box compatible with the latest LTE technology used by LTE providers in their radio cells:

5 Finding the ideal location for the FRITZ!Box

You can use the alignment aid to find the ideal location for the FRITZ!Box and the best position for the mobile broadband antennas:

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "LTE Information" in the "Internet" menu.
  3. Click on the "Reception" tab.
  4. Click the "Start Alignment Aid" button.
    • Now the FRITZ!Box displays the signal strength for both mobile broadband antennas.

      Note:When the alignment aid is active, the current signal strength is also displayed in a five-level display on the FRITZ!Box LEDs. This means that you can also find the best location for the FRITZ!Box without using the FRITZ!Box user interface.

  5. Select a location for the FRITZ!Box where the value shown is as high as possible. When doing so, note the following:
    • Do not set up the FRITZ!Box in the corner of a room.
    • Position the FRITZ!Box as close to an outside wall as possible. If you know where your provider's mobile radio cell is located, position the FRITZ!Box by the wall facing the mobile radio cell.

      Important:If the FRITZ!Box is located in the attic or on a window sill, make sure that the permissible operating temperature of 0° to 40° Celsius is not exceeded.

    • Position the FRITZ!Box so that it is as unobstructed as possible, i.e. not directly in back of or under an obstacle (for example pieces of furniture, heater).