FRITZ!Box 6840 LTE Service - Baza wiedzy

FRITZ!Box 6840 LTE Service
Not your product?
This document is also available for the following products:

Callers do not hear busy signal when call is already being conducted via FRITZ!Box

Callers hear a ringing tone instead of a busy signal if a telephone call is already being conducted over the FRITZ!Box. The caller then assumes that the line is available.

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface. The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS

Simply proceed as described below. After each measure, check whether the issue persists.

1 IP telephones do not support the function

The function "call rejection on busy (busy on busy)" is not supported when making calls with IP telephones (for example FRITZ!App Fon). If you are using an IP telephone to conduct a call, it is therefore not possible to give the caller a busy signal.

2 Configuring the FRITZ!Box

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the button (Edit) for the relevant telephone.
  4. Click on the "Telephony Device Features" tab.
  5. Enable the option "Call rejection on busy (busy on busy)".
  6. Disable the option "Call Waiting".
  7. Click "OK" to save the settings.