FRITZ!Box 6840 LTE Service - Baza wiedzy

FRITZ!Box 6840 LTE Service

Cannot make outgoing calls

You cannot make calls over the internet with a telephone or telephones connected to the FRITZ!Box. This may also only occur with certain numbers you attempt to call. The problem either occurs sporadically or all the time. When it occurs, the telephone number may not be registered at that time and one of the following error messages or a different message referring to the telephone number may be displayed in the event log of the FRITZ!Box:

  • "Registration of internet telephone number [number] failed. Reason for error: DNS error"
  • "Registration of internet telephone number [number] failed. Reason for error: Remote site not responding. Timeout."
  • "Registration of internet telephone number [number] failed. Remote site reports reason for error: [40x, 50x, 500, 503]"
  • "Internet telephony registration failed [number] Reason for error: [401, 402, 403]"
  • "Internet telephony with [Number] failed. Reason for error: [404, 405, 406, 407, 408, 50x]"
  • "Internet telephony with [number] via [registrar] failed. Reason for error: Not Acceptable Here (488)"
  • "Internet telephony with [number] via [registrar] failed. Reason for error: Timeout: The call was not accepted. [Message]"
  • "Internet (telephony) connection cleared."

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem is solved.

1 Entering your location information

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Select your country from the drop-down list under "Location Information". If your country is not listed, select "Other country".
  5. For the "Country code", enter the leading zeros in the first field and the country code in the second field (for example, enter "00" and "49" for Germany, see fig.).
  6. For the "Area code", enter the leading zero in the first field and the area code in the second field (for example enter "0" and "30" for Berlin, see fig.).

    Fig.: Entering the country code and area code (e.g. for Germany and Berlin)

  7. Click "Apply" to save the settings and confirm that the procedure may be executed on the FRITZ!Box, if asked to do so.

2 Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

3 Deleting call blocks

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Call Handling" in the "Telephony" menu.
  3. Delete call blocks for outgoing calls to individual numbers or ranges of numbers that you want to call.

4 Reconfiguring telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the (Delete) button for the telephone number.
  4. Reconfigure the telephone number and select your internet telephony provider during setup.
  5. If the telephone number cannot be registered after setup, contact your provider to have your telephone number and account information checked.

5 The provider rejects the call attempt

This section only applies if the message "Internet telephony [...] failed. Reason for error: Not Acceptable Here (488)" is displayed under "System > Event Log" in the FRITZ!Box user interface when the error occurs. This message from your provider means that they do not make a requested function available for your line. This could be caused by the following reasons, for example:

  • The provider does not support the requested codec.
  • The provider does not support calls to the destination telephone number, for example calls to premium numbers.
  • The provider does not allow you to make more than one call at a time.

Therefore, the FRITZ!Box cannot resolve this issue.

6 Setting your analog telephone to tone dialing

  1. Set your device to "tone dialing" (DTMF) and not "pulse dialing". If tone dialing is selected, you hear a tone when you press a number key; with pulse dialing, you hear clicking sounds. Refer to the device's manufacturer for information on how to set it up, for example consult the manual.

7 Setting up FRITZ!App Fon

The following steps are only necessary if the problem occurs when using FRITZ!App Fon:

Defining telephone numbers for FRITZ!App Fon

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for FRITZ!App Fon. When it was installed, FRITZ!App Fon was automatically configured with the telephone's device name on the "LAN/WLAN" port in the FRITZ!Box.
  4. From the drop-down list "Outgoing calls", select the number that FRITZ!App Fon should use for making calls.
  5. Select the numbers that FRITZ!App Fon should react to when you receive calls.
  6. Click "OK" to save the settings.

Disabling HD telephony

  1. Start FRITZ!App Fon.
  2. Tap "More" and then "Settings".
  3. Disable the option "HD telephony".

Enabling alternative microphone

The following steps are only necessary if the problem occurs with FRITZ!App Fon on an Android device:

  1. Start FRITZ!App Fon.
  2. Tap "More" and then "Settings".
  3. Tap the menu key on the telephone and then tap "Advanced".
  4. Enable the option "Alternative microphone".

8 Reconfiguring your telephone

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Delete the telephone that you cannot make calls with. To do so, click the corresponding (Delete) button.
  4. Use the wizard to reconfigure the telephone: To do so, click the "Configure New Device" button and follow the instructions.

    Important:Do not use the wizard configure FRITZ!App Fon. FRITZ!App Fon is automatically reconfigured when you close FRITZ!App Fon completely and then restart the app.

9 Disabling HD telephony

The following steps are only necessary if the problem occurs with a cordless telephone:

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Cordless Telephones" in the "DECT" menu.
  3. Click the (Edit) button for the respective telephone.
  4. Click on the "Telephony Device Features" tab.
  5. Select the option "HD disabled" from the drop-down list in the "HD Telephony" section. If the section is not displayed, enable the Advanced View.
  6. Click "OK" to save the settings.