FRITZ!Box 7272 Serwis - Baza wiedzy

FRITZ!Box 7272 Serwis
Not your product?
This document is also available for the following products:

Cannot update FRITZ!OS: Error message after selecting a FRITZ!OS file

The FRITZ!OS update for the FRITZ!Box cannot be installed.

After you select the FRITZ!OS file in the FRITZ!Box user interface, one of the following error messages is displayed:

  • "FRITZ!OS Update failed. An unspecified error occurred during the update."
  • "Attention! The specified file does not contain a FRITZ!OS released for this device by AVM."
  • "After FRITZ!OS was loaded an incorrect checksum was detected (file system)."

Important:Some of the settings described here are only displayed if the advanced view is enabled in the user interface.

Simply proceed as described below. After each measure, check whether the issue persists.

1 Internet service provider prevents update

Some Internet service providers prevent you from manually installing the FRITZ!OS update for your FRITZ!Box. In this case, you are either temporarily or permanently unable to use the FRITZ!Box user interface to install an update. Contact your provider directly for corresponding information and on when it will be possible to update manually, or when the Internet service provider will automatically install an update.

2 Repeating the update process

Downloading the FRITZ!OS file again

The FRITZ!OS file may not be suitable for your FRITZ!Box, or the file may not have been downloaded completely. Therefore, download the file again:

  1. Call up ftp://ftp.avm.de/fritz.box/ in your web browser.
  2. Switch to the folder for your FRITZ!Box model, then to the subfolder "firmware", and then to the folder named "english".

    Note:The complete model name of your FRITZ!Box is displayed in the FRITZ!Box user interface on the "Overview" page and on the underside of the device.

  3. Download the latest FRITZ!OS version for your FRITZ!Box with the file extension ".image" to the computer.

Clearing Internet connection and closing all active programs

ATTENTION!Only disable firewalls when updating FRITZ!OS and re-enable them before establishing an Internet connection. This software protects your computer from attacks from the Internet and prevents other threats (for example computer viruses) from being executed.

  1. Remove the cable connecting your FRITZ!Box to your DSL line or the device establishing the Internet connection.
  2. Close all active programs running in the background such as virus scanners, firewalls, etc.

Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

Updating the firmware manually

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Update" in the "System" menu.
  3. Click on the "FRITZ!OS File" tab.
  4. Click "Save Settings".

    Note:Save your FRITZ!Box settings again under "System > Backup" right after successfully completing the installation. Then you can always restore it to a working configuration.

  5. Click the "Browse..." button.
  6. Select the FRITZ!OS file that you downloaded (image file) and click the "Open" button.
  7. Click the "Start Update" button.

The "Info" LED flashes while the update is being transmitted to the repeater.

Establishing an Internet connection

  • Reconnect your FRITZ!Box to your DSL line or the device establishing the Internet connection.