FRITZ!Box 7272 Serwis - Baza wiedzy

FRITZ!Box 7272 Serwis

Setting up the FRITZ!Box as an IP client

When the FRITZ!Box is used as an IP client, it shares the existing Internet connection of your other router. In this case

  • the firewall of the FRITZ!Box is disabled.
  • network devices connected to the FRITZ!Box still obtain their IP settings from the other router.
  • all network devices have unrestricted access to all other network devices, regardless of whether they are connected to the FRITZ!Box or the other router.

Requirements / Restrictions

  • The FRITZ!Box's security functions (for example firewall, parental controls), the online meter, guest access, and all functions that require a public IP address (for example MyFRITZ!, port sharing, and incoming VPN connections) are not available in IP client mode.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

1 Preparations

Determining the throughput of the Internet connection

  • Determine and make note of the throughput (speed) available on the router's Internet connection for downstream (data reception) and upstream (data transmission).

    Note:You can find information on the speed of your Internet connection in the router's user interface or contact your Internet service provider.

Determining the router's IP settings

  • Enable the router's DHCP (Dynamic Host Configuration Protocol) server so that the FRITZ!Box and network devices connected to it automatically receive all of the IP settings required to access the Internet and communicate with other devices,
    • or, if the router cannot provide a DHCP server:
  • Make note of the router's IP address and subnet mask.

2 Configuring the FRITZ!Box

  1. Click "Internet" in the FRITZ!Box user interface.
  2. Click "Account Information" in the "Internet" menu.
  3. Select "Other Internet service provider" from the drop-down list "Internet service provider". With some regional settings, this entry will not be displayed until you select "More Internet service providers".
  4. Enable the option "External modem or router" in the "Connect via" or "Connection" section.
  5. Select "Share existing Internet connection in the network (IP client mode)" in the "Operating Mode" section.
  6. Enter the relevant speeds of your Internet connection in the "Downstream" and "Upstream" fields.

    Example:
    Enter 32000 for a downstream of 32 Mbit/s; enter 2000 for an upstream of 2 Mbit/s.

  7. Click on "Change connection settings".
  8. Configure the IP settings:
    • If the router in the network provides a DHCP server:
      • Enable the option "Obtain the IP address automatically (DHCP)".
    • If the router in the network does not provide a DHCP server:
      1. Enable the option "Configure the IP address manually".
      2. Enter IP settings that fit with the IP network of the router:
        • "IP address": IP address from the router's network.

          Example:
          The router has the IP address 192.168.100.1 (subnet mask 255.255.255.0) and is therefore in the network 192.168.100.0. In this case you can enter 192.168.100.2 as the IP address.

          Important:The IP address you select may not already be used by another device in the router's network.

        • "Subnet mask": Subnet mask of the router
        • "Default gateway": IP address of the router
        • "Primary DNS server": IP address of the router
  9. Click "Apply" to save your settings.

The FRITZ!Box is now configured for operation as an IP client.

Important:In this operating mode, you can no longer open the user interface with http://fritz.box. Instead, proceed as described in the section "Opening the FRITZ!Box user interface" (see below).

3 Connecting the FRITZ!Box with the network

  • Use a network cable (for example the yellow network cable included with delivery) to connect the "LAN 1" port on FRITZ!Box directly to the router, or connect it by means of a hub or switch.

Now the FRITZ!Box uses the Internet connection of the other router.

4 Opening the FRITZ!Box user interface

When used as an IP client, you can no longer open its user interface by entering http://fritz.box. Instead, you must enter the FRITZ!Box's IP address to open it:

  • In the web browser, enter the IP address that the router's DHCP server assigned to the FRITZ!Box (for example 192.168.100.20),
    • or, if you enabled the option "Configure the IP address manually" in the FRITZ!Box:
  • In the web browser, enter the IP address that you entered in the "IP address" field in the FRITZ!Box user interface (for example 192.168.100.2).
    • or, if you cannot determine or have forgotten the IP address of the FRITZ!Box,
  • Use the FRITZ!Box's "emergency" IP address to open the user interface.

5 Setting up the FRITZ!Box to conduct calls over another router

The following step is only necessary if you would like to connect telephones to the FRITZ!Box and then use the Internet connection of the other router or a landline to conduct calls with them:

6 Setting up the FRITZ!Box for wireless roaming

If the other router does not provide a wireless network, you can use the FRITZ!Box as a wireless access point and connect your wireless devices to the FRITZ!Box's wireless network.

If the other router has wireless capabilities, you can use the FRITZ!Box as an additional wireless access point. This way your wireless devices can access the Internet and other devices in the home network over the FRITZ!Box, even if the wireless network of your router is not available.

Configure the following settings in the FRITZ!Box so that your wireless devices can always automatically connect to the wireless network with the strongest signal (wireless roaming):

  1. Click "Wireless" ("WLAN") in the FRITZ!Box user interface.
  2. Click "Radio Network" in the "Wireless" ("WLAN") menu.
  3. Enter the name of the router's wireless network as the "Name of the wireless radio network (SSID)".
  4. Click "Apply" to save your settings.
  5. Click "Radio Channel" in the "Wireless" ("WLAN") menu.
  6. Enable the option "Adjust radio channel settings" in the "Radio Channel Settings" section.
  7. Select the channel used by the wireless router from the drop-down list "Radio channel".
  8. Click "Apply" to save your settings.
  9. Click "Security" in the "Wireless" ("WLAN") menu.
  10. Enable the wireless encryption used by the wireless router.
  11. Enter the wireless router's network key in the "Network key" field.
  12. Click "Apply" to save your settings.