FRITZ!Box 7490 Serwis - Baza wiedzy

FRITZ!Box 7490 Serwis
Not your product?
This document is also available for the following products:

Integrating FRITZ!WLAN Repeater into the Mesh via wireless LAN

Integrate a FRITZ!WLAN Repeater into your FRITZ!Box's Mesh via wireless LAN to easily and efficiently increase the wireless range of your home network. As a Mesh Repeater, the FRITZ!WLAN Repeater automatically adopts all of the wireless settings from the FRITZ!Box (Mesh Master) and creates an additional wireless network that enables your devices to connect to the home network.

As soon as the FRITZ!WLAN Repeater is integrated in the Mesh, it is marked in the user interface of the Mesh Master with the Mesh symbol :

Fig.: Mesh overview with FRITZ!WLAN Repeater in wireless LAN bridge mode

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.

1 Loading the FRITZ!WLAN Repeater factory settings

Before you can configure the following settings, you must return the FRITZ!WLAN Repeater to its factory settings:

2 Integrating FRITZ!WLAN Repeater into the Mesh

To integrate the FRITZ!WLAN Repeater into the Mesh, simply connect it with your FRITZ!Box (Mesh Master) at the touch of a button:

  1. For setup, plug the FRITZ!WLAN Repeater into an outlet near the Mesh Master (FRITZ!Box).
  2. Wait until the "Power" and "WLAN" LEDs on the FRITZ!WLAN Repeater remain lit.
  3. Briefly push the "WPS" button on the FRITZ!WLAN Repeater (for about 1 second). The "WLAN" LED starts to flash after you release the button.
  4. Within 2 minutes: Push and hold the "WLAN" button on the Mesh Master (FRITZ!Box) for about 6 seconds until its "WLAN" LED flashes.
  5. One or more LEDs indicating signal strength remain lit on the FRITZ!WLAN Repeater once it is integrated into the Mesh.

3 Finding the ideal location for the FRITZ!WLAN Repeater

To optimally increase the range, the repeater requires a fast and stable wireless connection to the home network:

4 Disabling the adoption of settings in the FRITZ!WLAN Repeater

If you want to configure your own wireless settings in the FRITZ!WLAN Repeater, you can also disable the adoption of settings:

Example:
The wireless radio network of a FRITZ!WLAN Repeater that supplies a child's room with wireless LAN should be switched off automatically at particular times. The wireless radio networks of the Mesh Master and the other Mesh Repeaters should still remain available at those times.

  1. Click "Access to Home Network" in the user interface of the FRITZ!WLAN Repeater.
  2. Disable the option "Automatically adopt wireless LAN settings".
  3. Click "Apply" to save the settings.

Now you can configure your own wireless settings in the FRITZ!WLAN Repeater.