FRITZ!Box 7490 Serwis - Baza wiedzy

FRITZ!Box 7490 Serwis
Not your product?
This document is also available for the following products:

Pin assignment of ports for telephony devices

The FRITZ!Box has various ports for connecting telephony devices. Here you will find the pin assignment of the FRITZ!Box ports so you can use your own cables, for example.

1 "FON S0" port on the FRITZ!Box

The cables of ISDN devices connected to the "FON S0" port on the FRITZ!Box must be assigned as follows:

Fig.: Pin assignment of the ISDN cable

 

Note:You can have a technician install an S0 interface connected to the "FON S0" port. The "FON S0" port is terminated (two 100 Ohm resistors are switched on the "FON S0" port in the FRITZ!Box).

2 RJ11 sockets of extensions "FON 1" and "FON 2"

The RJ11 sockets "FON 1" and "FON 2" only use the two middle pins.