FRITZ!DECT 301 Serwis - Baza wiedzy

FRITZ!DECT 301 Serwis
Not your product?

Cannot register a FRITZ!DECT radiator control

Registration of FRITZ!DECT 301 to the FRITZ!Box fails. After inserting the batteries in the device, "Gerät wird vorbereitet" and then "Gerät wird angepasst" are shown in the display, but the DECT connection is not established when you push the "DECT" button on the FRITZ!Box. The "Radio link" symbol is not shown continuously in the display of the radiator control. The error message "Could not complete registration of the FRITZ! actuator" is displayed in the FRITZ!Box.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

Simply proceed as described below. After each measure, check whether the problem persists.

1 FRITZ!Box model is not supported

FRITZ!DECT 300 and FRITZ!DECT 301 cannot be used with FRITZ!Box 7412, 7312, 7330, 7330 SL, 7360 SL, 6360 Cable, or 6810 LTE.

2 Maximum number has been reached

You can register a maximum of twelve radiator controls with the FRITZ!Box. If you already registered twelve devices, then you cannot register any additional ones.

Note:Registering a radiator control does not decrease the number of telephones, DECT repeaters, or the number of outlet switches, for example FRITZ!DECT 200, that can be registered.

3 Disabling the keylock

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the keylock.
  5. Click "Apply" to save the settings.

4 Disabling "Reduce DECT field strength"

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Disable the option "Reduce DECT field strength" in the "Radio Field Strength" section.
  4. Click "Apply" to save the settings.

5 Disabling "DECT Eco"

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Disable the option "DECT Eco" in the "Radio Field Strength" section.
  4. Click "Apply" to save the settings.

6 Enabling encryption

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Enable the option "Permit only secure DECT connections (recommended)" in the "Security" section.
  4. Click "Apply" to save the settings.
  5. If the option was disabled, you must then restart the FRITZ!Box once using the user interface ("System > Backup or Reset > Restart").

7 Setting a PIN

For automatic registration to work, you must set the PIN to "0000" under "DECT > Base Station" in the FRITZ!Box user interface:

  1. Click "DECT" in the FRITZ!Box user interface.
  2. Click "Base Station" in the "DECT" menu.
  3. Enter "0000" as the PIN in the "Registration" section.
  4. Click "Apply" to save the settings.

8 Re-registering the radiator control

Restarting the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Backup" in the "System" menu.
  3. Click on the "Restart" tab.
  4. Click the "Restart" button.

Establishing a DECT connection

  1. Remove the batteries from the battery compartment on the radiator control for at least 30 seconds.
  2. If the radiator control is not mounted on the radiator:
    1. Reinsert the batteries. "Gerät wird vorbereitet" is first shown on the display, and then "Gerät wird angepasst".
    2. Within 90 seconds, push the "DECT" or "Connect/WPS" button on the FRITZ!Box and hold it down until the "DECT" or "Info" LED on the FRITZ!Box begins to flash.
        • The connection to the FRITZ!Box is established.
    • If the radiator control is mounted on the radiator:
    1. Reinsert the batteries. "Gerät wird vorbereitet" is first shown on the display, and then "Gerät wird angepasst".
    2. Push the "OK" button until "Gerät wurde erfolgreich installiert" is shown in the display. The valve adjustment is completed as soon as the preset temperature appears on the display.
    3. Push the "DECT" or the "Connect/WPS" button on the FRITZ!Box and hold it down until the "DECT" or "Info" LED on the FRITZ!Box begins to flash.
    4. Push the "Menu" button within 90 seconds.
    5. Select the menu item "Anmeldung" on the radiator control and then push the "OK" button.
      • The message "Anmeldung war erfolgreich" is shown on the radiator control.

The radio connection is established as soon as the symbol for the existing radio connection appears in the display of the radiator control.