FRITZ!Powerline 540E Serwis - Baza wiedzy

FRITZ!Powerline 540E Serwis

Connecting FRITZ!Powerline with the home network via LAN

Connect FRITZ!Powerline to your router (for example FRITZ!Box) via LAN to easily and efficiently expand your home network with a single FRITZ!Powerline adapter. Since the powerline adapter is connected to the router using a network cable, you can position it within or outside the wireless range of the router. Alternatively, you can use FRITZ!Powerline as a powerline or wireless LAN bridge.

If FRITZ!Powerline and the wireless router use identical wireless settings, wireless devices can automatically connect with the wireless network with the strongest signal (wireless roaming).

Fig.: Connection scenario for LAN bridge mode

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for FRITZ!Powerline.

1 Loading the FRITZ!Powerline factory settings

If you just purchased FRITZ!Powerline and have not changed any settings yet, it is not necessary to load the factory settings:

2 Connecting FRITZ!Powerline with the router

  • Use a network cable to connect FRITZ!Powerline to a LAN port on the router.

3 Configuring FRITZ!Powerline as a LAN bridge

  1. Click "Access to Home Network" in the FRITZ!Powerline user interface.
  2. Click the "Change type of connection" button in the "Access to Home Network" menu.
  3. Enable the option "LAN bridge" and click "Next".
  4. Select which IP settings the FRITZ!Powerline adapter should use and click "Next".
  5. Keep the wireless LAN settings displayed for the FRITZ!Powerline adapter and click "Next".
  6. Click "Finish" to save the settings.

4 Integrating FRITZ!Powerline into the Mesh

If your FRITZ!Box supports Mesh, simply apply the FRITZ!Box's wireless settings by button. Then you can use all of the Mesh functions.

  1. Briefly push the connect button on your FRITZ!Powerline (for about 1 second). All of the LEDs start to flash after you release the connect button.
    FRITZ!Powerline modelConnect button
    FRITZ!Powerline 1260E Connect
    FRITZ!Powerline 1240E WLAN - WPS
    Powerline - Security
    FRITZ!Powerline 546E WLAN · WPS
    FRITZ!Powerline 540E
  2. Within 2 minutes: Push and hold the connect button on the FRITZ!Box until its confirmation LED lights up. Other LEDs may also light up.
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530 Connect / WPS  Connect / WPS 
    FRITZ!Box 7580, 4040, 3490 WPS Info
    FRITZ!Box 7560, 7362 SL WLAN Info
    FRITZ!Box 7490, 7430, 6490, 5491 WLAN WPS Info
    FRITZ!Box 6591, 6590 Connect / WPS  Info
  3. The process is complete as soon as FRITZ!Powerline is marked with the Mesh symbol in the Mesh overview of the FRITZ!Box.

5 Disabling the adoption of settings in FRITZ!Powerline

If you want to configure your own wireless settings in the FRITZ!Powerline adapter, you can also disable the adoption of settings:

The wireless radio network of a FRITZ!Powerline adapter that supplies a child's room with wireless LAN should be switched off automatically at particular times. The wireless radio networks of the Mesh Master and the other Mesh Repeaters should still remain available at those times.

  1. Click "Access to Home Network" in the FRITZ!Powerline user interface.
  2. Disable the option "Automatically adopt wireless LAN settings".
  3. Click "Apply" to save the settings.

Now you can configure your own wireless settings in the FRITZ!Powerline adapter.