FRITZ!Repeater 310 Serwis - Baza wiedzy

FRITZ!Repeater 310 Serwis

Connecting the FRITZ!Repeater with the FRITZ!Box via Wi-Fi

You want to connect a FRITZ!Repeater to the FRITZ!Box via Wi-Fi? ✓ Here we show you how easy it is.

Connect your FRITZ!Repeater to your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is automatically integrated into the Mesh and marked in the FRITZ!Box user interface with the Mesh symbol . The FRITZ!Repeater then adopts all of the settings from the FRITZ!Box, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception.

From then on, you can simply make changes in the Mesh in the FRITZ!Box. The FRITZ!Box automatically transmits the new settings to the FRITZ!Repeater. If you still want to access the user interface of the FRITZ!Repeater, use the password from the FRITZ!Box to log in.

In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box at the touch of a button (WPS - Push Button Configuration).

If you want to connect it manually, proceed as described in the guide Manually connecting the FRITZ!Repeater with the FRITZ!Box home network via Wi-Fi. However, in this case the FRITZ!Repeater is not integrated into the Mesh.

Fig.: Connection scenario for wireless bridge mode

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.

1 Loading the FRITZ!Repeater's factory settings

In order to perform the following steps, the FRITZ!Repeater must be set to factory settings:

  1. Plug the FRITZ!Repeater in.
  2. Wait about 1 minute until the FRITZ!Repeater starts and the "Power" and "WLAN" LEDs remain lit or the LEDs of the signal strength indicator flash.
  3. Push and hold down the "WPS" button down for about 15 seconds until all of the LEDs flash at the same time.

    Fig.: Loading the FRITZ!Repeater factory settings

  4. The "Power" and "WLAN" LEDs remains lit as soon as the factory settings have finished loading.

2 Setting up the FRITZ!Repeater as a wireless bridge

  1. For setup, plug the FRITZ!Repeater into a power outlet near the FRITZ!Box.
  2. Wait about 1 minute until the FRITZ!Repeater has started and the "Power" and "WLAN" LEDs remain lit.
  3. Briefly push the "WPS" button on the FRITZ!Repeater (for about 1 second) and let go of it again. When you release the button, the "WLAN" LED starts to flash.

    Important:If the "WLAN" LED only flashes briefly and then goes out, an older FRITZ!OS is installed. In this case, push the "WPS" button on the FRITZ!Repeater again briefly; when the "WLAN" LED lights up again, push and hold down the "WLAN" button for about 6 seconds until the "WLAN" LED flashes.

  4. Within 2 minutes: Push and hold down the connect button on the FRITZ!Box until its confirmation LED lights up. Other LEDs may also light up:
    FRITZ!Box modelConnect buttonConfirmation LED
    FRITZ!Box 7590, 7530 AX, 7530, 7520, 6890, 6850, 6660Connect / WPSConnect / WPS
    FRITZ!Box 6591, 6590Connect / WPSWLAN / DECT
    FRITZ!Box 7490, 7430, 5491, 5490WLAN WPSWLAN / Info
    FRITZ!Box 6490, 6430WLAN WPSWLAN / DECT
    FRITZ!Box 7560, 7362 SLWLANWLAN / DECT
    FRITZ!Box 7583, 7582, 7580WPSWLAN / Info
    FRITZ!Box 6820, 4040, 4020, 3490WPSWLAN
  5. The FRITZ!Repeater is fully integrated into the Mesh about 5 seconds after one or more signal strength LEDs on the FRITZ!Repeater remain lit.

3 Finding the ideal location for the FRITZ!Repeater

To extend the range as much as possible, the FRITZ!Repeater requires a fast and stable Wi-Fi connection to the FRITZ!Box:

  1. Position the FRITZ!Repeater so that at least three of its five signal strength LEDs light up. You can find tips on positioning it in the guide Finding the ideal location for FRITZ!Repeater.