FRITZ!WLAN Repeater 310 Serwis - Baza wiedzy

FRITZ!WLAN Repeater 310 Serwis
Not your product?
This document is also available for the following products:

Attempt to set up a wireless connection to the FRITZ!Box fails

Although the wireless connection was configured according to our guide, the signal strength LEDs on the FRITZ!WLAN Repeater flash continuously and the FRITZ!WLAN Repeater does not establish a connection to FRITZ!Box.

Important:If the wireless router you are using is not a FRITZ!Box and it does not support WPS, follow the instructions in this guide.

1 Disabling keylock for the FRITZ!Box

  1. Click "System" in the FRITZ!Box user interface.
  2. Click "Buttons and LEDs" in the "System" menu.
  3. Click on the "Keylock" tab.
  4. Disable the keylock.
  5. Click "Apply" to save the settings.

2 Enabling the WPS function of the FRITZ!Box

To connect the FRITZ!WLAN Repeater with the FRITZ!Box at the touch of a button (WPS - Wi-Fi Protected Setup), the WPS function in the FRITZ!Box must be enabled:

  1. Click "Wireless" ("WLAN") in the FRITZ!Box user interface.
  2. Click "Security" in the "Wireless" ("WLAN") menu.
  3. Click on the "WPS Quick Connection" tab.
  4. Enable WPS.
  5. Select "Push-Button method (WPS-PBC, Push Button Configuration)" and click "Start WPS".