FRITZ!WLAN Repeater 450E Serwis - Baza wiedzy

FRITZ!WLAN Repeater 450E Serwis
Not your product?
This document is also available for the following products:

Cannot switch wireless LAN off by pushing a button

The wireless network (WiFi) of the FRITZ!Repeater does not switch off when you push the "WPS" button.

Cause

  • The option to switch wireless LAN on or off by pushing a button was removed from FRITZ!OS 6.90 so you can set up wireless connections and integrate the FRITZ!Repeater into your Mesh by pushing a button. You can set up a schedule to switch the FRITZ!Repeater's wireless network on or off automatically, or you can switch it manually with the user interface.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Repeater.

1 Disabling the adoption of settings from the Mesh

When used in a Mesh, you must first disable the adoption of settings in the FRITZ!Repeater:

2 Switching the wireless function automatically

The schedule function allows you to automatically switch wireless LAN on and off at certain times:

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Schedule" in the "Wireless" ("WLAN") menu.
  3. Enable the option "Use schedule for wireless radio network" and define when the repeater's wireless network should be switched off.
  4. Click "Apply" to save the settings.

3 Switching the wireless function manually

You can use the user interface to switch wireless LAN off manually:

  1. Click "Wireless" ("WLAN") in the user interface of the FRITZ!Repeater.
  2. Click "Radio Network" in the "Wireless" ("WLAN") menu.
  3. Enable or disable the option "Wireless radio network enabled".
  4. Click "Apply" to save the settings.

The FRITZ!Repeater's wireless network is now switched off. You can push a button to switch the wireless network back on whenever you want.