FRITZ!WLAN Stick AC 430 Serwis - Baza wiedzy

FRITZ!WLAN Stick AC 430 Serwis

Error message "Unidentified Network" in the Windows Network and Sharing Center

A computer that is connected to a wireless router (for example the FRITZ!Box) by means of a FRITZ!WLAN Stick cannot access the internet. The computer's "Network and Sharing Center" displays the message "Unidentified Network".

Simply proceed as described below. After each measure, check whether the problem persists.

1 Enabling the wireless router's DHCP server

To ensure that all of the wireless devices connected to the wireless router automatically obtain the correct IP settings, make sure that the router's DHCP server is enabled:

Note:We used a FRITZ!Box as an example for the configuration. If you are using a different wireless router, refer to the device's manufacturer for information on how to set it up, for example consult the manual.

  1. Click "Home Network" in the FRITZ!Box user interface.
  2. Click "Network" or "Home Network Overview" in the "Home Network" menu.
  3. Click on the "Network Settings" tab.
  4. Click the "IPv4 Addresses" button. If the button is not displayed, enable the Advanced View first.
  5. Enable the DHCP server and define the range from which the FRITZ!Box assigns IP addresses.

    Note:The FRITZ!Box has the IP address (subnet mask and assigns IP addresses from xxx.20 to xxx.200 in the factory settings.

  6. Click "OK" to save the settings.

2 Configuring a computer to automatically obtain IP settings

To ensure that the computer always uses the correct IP settings, make sure that it automatically obtains its IP settings from the FRITZ!Box (this is the standard setting for most operating systems):

3 Configuring the computer's firewall

A firewall can interfere with the communication between the computer and the wireless router:

  • Configure the firewall so that it allows connections from the computer to the wireless router. Refer to the manufacturer of the firewall for information on how to set it up, for example consult the manual.