Setting up FRITZ!Powerline in the Mesh
AVM Content
Setting up the FRITZ!Box as a Mesh Repeater
You can set up your FRITZ!Box for use as a Mesh Repeater and use Wi-Fi or a network cable to integrate it into the Mesh of your FRITZ!Box with internet access (Mesh Master) to increase the range of your home network easily and efficiently.
As a Mesh Repeater, the FRITZ!Box automatically adopts all of the necessary settings from the Mesh Master (for example Wi-Fi access information, guest access, schedule) and creates an additional Wi-Fi network that enables your devices to connect to the home network. In addition, the telephone numbers entered in the Mesh Master can be activated for the Mesh Repeater and used by telephone devices configured in it.
As soon as the Mesh Repeater is integrated into the Mesh, it is marked with the Mesh symbol in the user interface of the Mesh Master:
Requirements / Restrictions
- The FRITZ!Box must support operation as a Mesh Repeater / IP client.
- FRITZ!OS 7 or later is installed on the FRITZ!Boxes.
1 Loading the Mesh Repeater's factory settings
To perform the following steps, the FRITZ!Box that you want to configure as the Mesh Repeater must be set to factory settings:
- Click "System" in the FRITZ!Box user interface.
- Click "Backup" in the "System" menu.
- Click on the "Factory Settings" tab.
- Click the "Load Factory Settings" button.
- During this process, all of the LEDs flash once. The WLAN LED remains lit as soon as the factory settings have finished loading.
2 Connecting the Mesh Repeater to the Mesh Master via LAN
So that you can access the user interface of the FRITZ!Box and configure it, also follow these steps if you want to connect the Mesh Repeater to the Mesh Master via Wi-Fi later:
- Use a network cable to connect a LAN port the FRITZ!Box that you want to configure as a Mesh Repeater to a LAN port on the Mesh Master.
3 Adding the Mesh Repeater to the Mesh by button
You must push a button to add the device to the Mesh. It does not matter whether you push the button on the Mesh Master or the Mesh Repeater first. We recommend the following order:
- Push and hold down the Connect button on the Mesh Repeater (see table) until the Connect LED flashes. Other LEDs may also flash.
- Within 2 minutes: Push and hold down the Connect button on the Mesh Master until the Connect LED (see table) lights up. Other LEDs may also light up.
FRITZ!Box model Connect button Connect LED FRITZ!Box 6690, 5690, 4060 Connect Connect FRITZ!Box 7690, 7590 (AX), 7530 (AX), 7520, 7510, 6890, 6850, 6670, 6660, 5590, 5530, 4050 Connect / WPS Connect / WPS FRITZ!Box 6591, 6590 Connect / WPS WLAN / DECT FRITZ!Box 7490, 7430, 5491, 5490 WLAN WPS WLAN / Info FRITZ!Box 6490, 6430 WLAN WPS WLAN / DECT FRITZ!Box 7560, 7362 SL WLAN WLAN / DECT FRITZ!Box 7583, 7582, 7581, 7580 WPS WLAN / Info FRITZ!Box 6820, 4040, 4020, 3490 WPS WLAN - The process is complete as soon as the Mesh Master marks the Mesh Repeater with the Mesh symbol in the Mesh Overview.
4 Setting up the Mesh Repeater as a wireless bridge
The following steps are only necessary if you want to use Wi-Fi to connect the Mesh Repeater to the Mesh Master:
- Click "Home Network" in the user interface of the Mesh Repeater.
- Click "Mesh" in the "Home Network" menu.
- Click on the "Mesh Settings" tab.
- Enable the option "via Wi-Fi".
- In the tables, select the 2.4 and 5-GHz Wi-Fi network of the Mesh Master. If several entries are displayed for the respective Wi-Fi network, use the MAC address to select the appropriate entry.
Note:The MAC addresses of the Mesh Master is displayed in its user interface under "Wi-Fi > Wi-Fi Network" in the "More Information on the Wi-Fi Network" section.
- Enter the Mesh Master's Wi-Fi network key in the "Network key" field.
- Click "Apply" to save the settings.
Now the Mesh Repeater is configured as a wireless bridge. You can remove the network cable to the Mesh Master and use the Mesh Repeater at the desired location. You can find tips on positioning it in the guide Finding the ideal location for the Mesh Repeater.
5 Setting up telephony in the Mesh
The following steps are only necessary if you want to use telephones connected to the Mesh Repeater:
- Click "Home Network" in the user interface of the Mesh Master.
- Click "Mesh" in the "Home Network" menu.
- Click on the "Mesh Settings" tab.
- In the section "Using Telephony in the Mesh", click the "Share" link next to the respective Mesh Repeater and on the Mesh Master, confirm that the procedure may be executed, if you are asked to do so.