Do bazy wiedzy
Dokument informacyjny #3693

Setting up the FRITZ!Box for use with a fiber optic connection from DELTA

The FRITZ!Box is optimally prepared for use with DELTA. Simply connect the FRITZ!Box to the fiber optic connection, select DELTA as the internet service provider in the FRITZ!Box, and configure telephony.

The complete FRITZ!Box range of functions for internet, telephony, and smart home is then available to all of the devices in your home network without restriction.

Requirements / Restrictions

  • A FRITZ!Box with the SFP module "FRITZ!SFP AON" is required for AON fiber optic connections.
  • A FRITZ!Box with the SFP module "FRITZ!SFP XGS-PON" is required for XGS-PON fiber optic connections.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Inserting the SFP module into the FRITZ!Box

The FRITZ!Box is available in several different product variants, each of which is delivered with different components. If there was no SFP module inserted in your FRITZ!Box, perform the following steps:

  1. Insert the SFP module that is suitable for your fiber optic connection into the fiber slot of the FRITZ!Box:
    1. If you have an AON fiber optic connection, insert the SFP module "FRITZ!SFP AON" into the fiber slot of the FRITZ!Box.
    2. If you have an XGS-PON fiber optic connection, insert the SFP module "FRITZ!SFP XGS-PON" into the fiber slot of the FRITZ!Box.
      Inserting the SFP module into the FRITZ!Box

      Important:If you do not know what kind of fiber optic connection you have, test all of the SFP modules supplied with the FRITZ!Box. The Power/Fiber LED on the FRITZ!Box remains lit as soon as the FRITZ!Box is connected to the fiber optic connection using the correct SFP module.

2 Connecting the FRITZ!Box to your fiber optic connection

  1. Remove the dust protection caps from the fiber optic cable, the SFP module in the FRITZ!Box, and from the fiber optic socket.
  2. Connect the fiber optic cable to the SFP module in the FRITZ!Box and to the fiber optic socket. Do not bend the fiber optic cable and do not hold the ends of the cable in front of your eyes.

    Note:Some fiber optic connections use a fiber terminating unit from Attema which requires a special fiber optic cable that is clamped into a carriage in the socket. Such cables are available from vendors. You can find information on selecting a suitable cable in our guide Which fiber optic cable do I need?

    Connecting the FRITZ!Box to the fiber optic connection

3 Plugging the FRITZ!Box in

  1. Plug the power adapter into the FRITZ!Box's power socket and plug it into a power outlet.

4 Unlocking your FRITZ!Box

Modem ID on the FRITZ!Box's type label
  1. If you are using the FRITZ!Box with an XGS-PON fiber optic connection, call Delta's customer service at 0118 225525 to have them unlock the FRITZ!Box for your connection. For this, give them the "modem ID" on the FRITZ!Box's type label. If you are asked for the MAC address of the FRITZ!Box, give them a fictitious MAC address, for example ab:00:00:00:00:00.

5 Configuring the internet connection in the FRITZ!Box

  1. Open the FRITZ!Box user interface.
  2. Enter the FRITZ!Box password given on the type label of the FRITZ!Box and click "Log In".
  3. If the wizard for internet access does not start automatically, click "Wizards" and then "Configure the Internet Connection".
    Calling up the FRITZ!Box wizard
  4. Select "DELTA / Caiway" from the drop-down list.
  5. Click "Next" and follow the wizard's instructions.
  6. Now the FRITZ!Box checks whether the internet connection can be established. Configuration is complete as soon as the message "The internet connection check was successful" is displayed.

    Important:If the internet connection check fails, your internet access may not have been activated yet. In this case, contact DELTA.

6 Setting up telephony in the FRITZ!Box

Having your login information ready

  1. Have the login information for telephony ready (for example the username and password) that was displayed to you in MijnDELTA's customer portal.

    Note:If your login information is not displayed in the customer portal, contact DELTA.

Setting up the telephony connection

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Click "Changing the Settings" in the "Telephony connection" section.
  5. Click "Connection Settings for DSL/WAN".
  6. Enable the option "VLAN required for internet telephony".
  7. Enter 102 in the field "VLAN ID".
  8. Enter 5 in the field "PBit". 
  9. Enable the option "Use a separate connection (PVC) for Internet telephony".
  10. By "Is account information required?", enable the option "No".
  11. Enable the option "Obtain the IP address automatically (DHCP)".
  12. Click "Apply" to save the settings.

Configuring telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the "New Telephone Number" button.
  4. Select "Other provider" from the drop-down list.
  5. Enter your telephone number including the area code (for example 31201234567) by "Telephone number for registration".
  6. Enter your telephone number (for example 1234567) by "Internal telephone number in the FRITZ!Box".
  7. Enter the login information you received from DELTA by "Username" and "Password".
  8. Enter voice.caiw.net in the field "Registrar".
  9. Enter voice.caiw.net in the "Proxy server" field.
  10. Enter your area code by "Area Code".
  11. Click "Additional Settings" to display all of the settings.
  12. Select "RTP or in-band" for "DTMF transmission".
  13. Click "Next" and follow the wizard's instructions.

Adjusting the number format

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click the (Edit) button for the respective internet telephone number.
  4. Click "Telephone Number Format".
  5. Select the option "None" for the country code and area code in the "Telephone Number Format" section.
  6. Click "Apply" to save the settings.

Assigning telephone numbers

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. Click the (Edit) button for the respective telephony device.

    Important:If the telephony device was not configured yet, click the "Configure New Device" button and follow the wizard's instructions.

  4. From the drop-down list "Outgoing Calls", select the number to be used by the telephony device for making outgoing calls. If you do not select a telephone number, the number entered under "Telephone Numbers > Line Settings" is used for making calls.
  5. Select the telephone numbers to which the telephony device should react when you receive calls. You can select up to ten numbers (including the number for outgoing calls).
  6. Click "Apply" to save the settings.



Help topics:

Wybór języka