Do bazy wiedzy
Dokument informacyjny #108

Setting up an external fax in the FRITZ!Box

You can use a fax machine connected to an analog extension or the jack for ISDN devices of your FRITZ!Box to send and receive faxes over the internet and/or landline.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Connecting fax machine to the FRITZ!Box

  1. Either connect the fax machine to an analog extension of the FRITZ!Box (for example "FON 1") or, if you use an ISDN telephone system (PBX) connected to the "FON S0" socket of the FRITZ!Box, connect the fax machine to an analog extension on the ISDN telephone system.

    Important:There are two different types of "FON 1" jacks: One for telephony devices with a TAE plug and one for devices with an RJ11 plug. Only one of the two "FON 1" sockets may be used at once. The other "FON 1" socket must remain free (unused).

  2. If the fax machine is an all-in-one printer with an integrated fax machine, also use a network cable or Wi-Fi to connect the printer to the home network of the FRITZ!Box and configure the printer as a network printer.

2 Enabling fax transmission with T.38

If you use an internet telephone number for faxing, you must enable T.38 (fax over IP) in the FRITZ!Box for fax transmission. With T.38, a special network protocol is used for fax transmission instead of signal tones. This makes transmission significantly less susceptible to interference:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Click "Changing the Settings" in the "Telephony connection" section.
  5. Enable the option "Fax transmission using T.38".
  6. Click "Apply" to save the settings.

3 Enabling the fax switch (passive)

If you want to use your analog landline number to receive both telephone calls and faxes, enable the FRITZ!Box's fax switch. The fax switch automatically forwards faxes to a fax machine configured in the FRITZ!Box:

Important:For faxes to be recognized and forwarded, a different device, for example a telephone or answering machine, must accept the call. The fax switch does not recognize calls that are not accepted.

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephone Numbers" in the "Telephony" menu.
  3. Click on the "Line Settings" tab.
  4. Enable the passive fax switch. If the setting is not displayed, configure your analog landline number in the FRITZ!Box. You can then enable the passive fax switch.
  5. Click "Apply" to save the settings.

4 Reconfiguring the fax machine

Set up the fax machine in the FRITZ!Box, even if it is connected to the FRITZ!Box via an ISDN telephone system:

  1. Click "Telephony" in the FRITZ!Box user interface.
  2. Click "Telephony Devices" in the "Telephony" menu.
  3. If the fax machine is already displayed in the list of telephony devices, click the (Delete) button for the fax machine.
  4. Reconfigure the fax machine: Click the "Configure New Device" button and follow the instructions.
  5. If you cannot select the socket the fax machine is connected to when configuring it, another telephony device was already configured for that socket. Delete that device.
  6. If the fax machine is connected to the "FON S0" socket on the FRITZ!Box, during setup you will be shown which telephone numbers to assign to the fax machine. If the fax machine is connected via an ISDN telephone system, you must assign the telephone numbers to the port on the ISDN telephone system that the fax machine is connected to.



Help topics:

Related topics:

Wybór języka