Do bazy wiedzy
Dokument informacyjny #3769
FRITZ!Box 7590 AX
Ten dokument pomocniczy jest dostępny dla następujących produktów:

Loading the factory settings of FRITZ!DECT 350

Load the factory settings to reconnect the FRITZ!DECT door/window contact or to connect it with a different FRITZ!Box or FRITZ!Smart Gateway. This makes sense if you are going to use the door/window contact at a different location or are planning to pass it on to another user, for example.

You can easily load the factory settings of the door/window contact using the pin included with delivery.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Loading the factory settings

Loading the factory settings of FRITZ!DECT 350
  1. Open the housing of FRITZ!DECT 350.
  2. Pick up the pin included with delivery.
  3. Carefully insert the pin into the "Reset" opening inside the housing for at least one second. The LED inside the sensor begins to flash and the factory settings are loaded.

2 Deregistering the door/window contact

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Devices and Groups" in the "Smart Home" menu.
  3. Click the "Delete Device" button.
  4. Click the (Delete) button next to the respective device.
  5. Click the "Finished" button.
Wybór języka