To the knowledge base

Setting up temperature-based switching for a FRITZ!DECT smart plug

You can set up temperature-based switching for the smart plug, for example FRITZ!DECT 200. When the specified temperature is reached, the smart plug is switched according to the desired schedule. As the temperature sensor for switching, you can use the smart plug itself or a different temperature sensor in the home network, for example FRITZ!DECT 440, that you can position at an ideal location for measuring the room temperature.

This allows you to easily control a connected device for heating or cooling. For example, you can switch a connected infrared heater that keeps the room temperature at 21 degrees during the day (normal temperature) and lets it drop to 18 degrees at night (cool-down temperature).

Requirements / Restrictions

  • The smart plug can measure in a temperature range between -5°C and 40°.
  • You cannot manually switch a smart plug during the schedule set for temperature-based switching because the temperature is measured every two minutes and adjustments are made according to the set normal and cool-down temperature.
  • Since the smart switch FRITZ!DECT 440, smart plugs, FRITZ!DECT Repeaters, and FRITZ!DECT radiator controls operate according to the DECT ULE (Ultra Low Energy) standard, they only communicate with the FRITZ!Box at longer intervals to save energy and minimize DECT radiation. The smart plugs transmit the measured temperature every two minutes. FRITZ!DECT 440, FRITZ!DECT Repeater, and radiator controls transmit these values every 15 minutes or every 60 minutes during vacation switching and the phase when the radiator is turned off.

Note:All instructions on configuration and settings given in this guide refer to the latest FRITZ!OS for the FRITZ!Box.

1 Setting up temperature-based switching

First you must set up a group with the smart plugs that should be switched on or off automatically when a certain temperature is reached. The group may also consist of a single smart plug. Next, set up switching for the group:

  1. Click "Smart Home" in the FRITZ!Box user interface.
  2. Click "Groups and Templates" in the "Smart Home" menu.
  3. Click on the "Create Group" button.
  4. Enable the corresponding group of devices.
  5. Click the drop-down menu and select the devices you want to switch together in the group.
  6. Click on "Next".
  7. Enter a name for the group and click "Next" to save the settings. The group is then created.
  8. Click on "Configure Group Now".
  9. Enable the options "Switching a Group Automatically" and "Temperature".
  10. Enable the option "Heat" or "Cool", depending on the connected device (for example an infrared heater or air-conditioning).
  11. From the drop-down list "Temperature sensor", select the device that should measure the temperature. This device does not have to belong to the group. You can see the temperature readings in the "Smart Home" menu in the user interface.
  12. If you selected the option "Heat", set the "Normal temperature" and "Cool-down temperature".
  13. If you selected the option "Cool", set the "Normal temperature" and "Cooling off".
  14. Select the desired switching times in the weekly calendar by clicking on them or holding down the left mouse button while you drag the mouse across the desired times.
  15. Click "OK" to save the settings.

Now a heating device, for example an infrared heater, switches on during the specified period as soon as the temperature drops below the "normal temperature" or the "cool-down temperature". It is switched off as soon as the "normal temperature" or the "cool-down temperature" is reached.

Now a cooling device, for example an air conditioning unit, switches on during the specified period as soon as the "normal temperature" is exceeded. It is switched off as soon as the "normal temperature" is reached. The cooling device remains switched off during the "cooling off" times you selected.